Back

IC1805_IC1848_Ha_Try1

IC1805_IC1848_Ha_Try1_present.jpg

(Click to enlarge)
This image © Copyright 2018, Michael Fulbright

IC1805/IC1848 Canon 100mm f/2.8 lens (stopped down to around f/3.5ish with step rings) ASI1600MM-Cool, gain=139, offset=21, T=-25C AP Mach1 Had some nasty star elongation - something is tilted is my guess. Since I used a 3D printed bayonet adapter for the Canon lens there is probably lots of room for misalignment/tilt. Next should try stepping down to f/4. In effort to cleanup stars left lots of processing artifacts. Need to go back through more carefully when shaping stars. 100 x 180s (5 hours) | IC1805/IC1848Canon 100mm f/2.8 lens (stopped down to around f/3.5ish with step rings)ASI1600MM-Cool, gain=139, offset=21, T=-25CAP Mach1100 x 180s (5 hours)


Date: 11/20/2016